Hazardous material

NU-CALGON 4178-08 Foam-Brite Condenser Coil Cleaner

Brand: Nu-Calgon
SKU 25-0042
  • Provides more foam than any condenser coil cleaner in the market
  • Ultimate cleaning and brightening while it foams
  • Use it in place of the more dangerous HF acid-based products

Description

NU-CALGON 4171-08 Foam-Brite Condenser Coil Cleaner

Foam-Brite’s foaming power is incredible. It is a non-acidic, alkaline-based cleaner and brightener containing the best available biodegradable ingredients and a unique chelant/surfactant package to quickly penetrate and remove greasy soils and oxidation. Its high foaming formula helps lift greasy soils out of the coil, leaving finned coils clean and bright. It can be used to replace the more dangerous HF acid-based products for condenser coil cleaning because Foam-Brite does not contain any acids.

For cleaning and brightening air cooled condensers, permanent filters and other finned heating and cooling coils. It is an alkaline based cleaner that does all that an acid will do without the danger of an acid. Do not use on evaporator coils. Not for indoor use.

Features and Benefits

  • Provides more foam than any condenser coil cleaner in the market.
  • Ultimate cleaning and brightening while it foams.
  • Use it in place of the more dangerous HF acid-based products.

Directions

  • Goggles, gloves and other protective garments should be worn when using this product. System should be shut off.
  • Apply using any of the Nu-Calgon sprayers, or other durable, low pressure, plastic sprayer.
  • Prepare cleaning solution by mixing one part Foam-Brite with three to four parts of water. Add the water to the sprayer first, then add the cleaner.
  • Spray cleaning solution onto dirty condenser coils and allow it to remain in contact with the dirty surfaces for 5-10 minutes.
  • Rinse thoroughly with water.
  • Apply Cal-Shield® as a coil protectant and return system to service.
  • Rinse out sprayer, spraying wand and nozzle.
  • When the Foam-Brite container is empty, rinse, replace cap and dispose of properly.

This product must be used in accordance to the following directions by HVACR professionals only.

Nu Calgon #4171-08 Specifications

Restrictions and Compliance

Read and understand the product’s label and Safety Data Sheet (“SDS”) for precautionary and first aid information. The SDS is available on the Nu-Calgon website at www.nucalgon.com

Additional information

Weight 2 lbs
Dimensions 10 × 10 × 6 in
Model

4171-08

Brand

Made In

Restrictions and Compliance

Hazardous material

Reviews

There are no reviews yet.

Be the first to review “NU-CALGON 4178-08 Foam-Brite Condenser Coil Cleaner”

Your email address will not be published. Required fields are marked *