Description
Johnson Controls - P545NCB-22C Electronic Lube Oil Control 120 Seconds Copeland
The P545 Series Electronic Lube Oil Control is designed for use on refrigeration compressors equipped with an oil pump that accepts a single-point differential pressure switch. The P400 switch continuously monitors net lube oil pressure and the P545 control locks out the compressor if lube oil pressure falls below the manufacturers recommended net pressure for longer than the recommended lube oil time delay. Front-mount Light-Emitting Diodes (LEDs) indicate the status of the lubrication system, and a user-selectable, minimum-off time delay can be set to minimize compressor short cycling.
A Johnson Controls/PENN® R310AD Current Sensing Switch, sold separately, may be used to disable the P545 control lockout circuit during abnormal compressor shutdowns.
Features and Benefits
- Connection Size: 40″ Cable with Copeland Sensor
- Pressure Range PSIG: 12.75 Fixed
- Time Delay: 120 Seconds
Johnson Controls #P545NCB-22C Specifications
- Includes: Sensor and Wire Harness
- For Use With: P400AD-2
- Width (In.): 4 in
- Time Delay (Sec.): 120
- Type: Electronic
- Depth (In.): 3 in
- Country of Origin (subject to change): Mexico
- Capillary Length (In.): 40 in
- Voltage: 120/240
- Height (In.): 6 in
- Item: Lube Oil Control
- Pressure Range (PSI): Fixed 12.75
- Pressure Connection: Single Point P400
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office or representative. Johnson Controls shall not be liable for damages resulting from misapplication or misuse of its products.
Reviews
There are no reviews yet.